PDW Online Shop

Moulding Silicone, Resin & Kits.

R217 Resin
(1kg or 2kg Kits)

R217 is a 1:1 mix with a working time of 7mins and a cure time of 60mins.  
Toy safe resin and cures to a slightly translucent finish which can be pigmented with polyurethane pigments. A non-brittle, odourless resin.

R219 Resin
(1kg or 2kg Kits)

R219 is a 1:1 mix with a working time of 15mins and a cure time of 90mins.
Toy safe resin and cures to a slightly translucent finish which can be pigmented with polyurethane pigments. A non-brittle, odourless resin.

Silicone
(1.1KG Kit)

RTV Mould Making Rubber 4512 (20A) or 4514 (25A) Condensation Cure Silicone 1.1KG Kits. Ideal for general moulding where softer silicones are required. High tear strength and elongation for easier demoulding.

PDW Creative Materials Ltd

Online Shop

PDW Creative Materials Ltd

07568 338006

R217 & R219 casting resins are toy safe resins and cure to a slightly translucent finish, which can be coloured with polyurethane pigments.
R217 & R219 are both a 1:1 mix ratio by weight.
R217 & R219 are odourless resins.
R217 has a working time of 7 minutes and a cure time of 60 minutes at 200g weight.
R219 has a working time of 15 minutes and a cure time of 90 minutes at 200g weight.
R217 & R219 are non-brittle resins that are extremely tough.
Shake Part 'A' of R217 or R219 well before use.
Mix together Parts A & B for 1 minute before pouring.
Replace tops on containers as soon as you have decanted as this will protect the R217 or R219 from atmospheric moisture and prolong the products life.

4512 (20 Shore A) and 4514 (25 Shore A) Condensation Cure Silicones Cures Orange or green depending on Catalyst colour. Coloured catalyst makes it easy to see uniformed blend.
Ideal for general moulding where soft silicones are required.
Low viscosity. 24 Hour curing strength
High tear strength and elongation for easier demoulding.
Excellent release properties. Excellent resistance to chemical attack. 
Easy to mix by hand due to low viscosity. 
Can be used without a vacuum tank. 
Can be made brush-able with PDW thixotropic for vertical moulding.  
Catalyst Orange or Green 10% additive by weight. Ideal for general moulding. 
Resistent to polyester, plaster, polyurethane and cement.  

PLEASE MAKE SURE TO WEIGH EXACTLY. BOTTLES MAY CONTAIN EXCESS PRODUCT TO ENSURE CUSTOMERS HAVE ENOUGH.

Expert help, support and technical advice is offered (if needed) on all products after purchase. Please get in contact with me.
Feedback would be greatly appreciated.
UK Delivery only. 
Thank you for your purchase.

Call Pam on:

07568 338006

PDW Creative Materials Ltd
Company Registration No: 10431116
17 Brooklyn Road, Cannock,
Staffordshire. WS12 3HP
Tel: 07568 338006
Email: wspam40@gmail.com
© 2018 All Rights Reserved
Cookie Policy    Privacy Policy
Terms of Use    Useful Links